You're reading the documentation for a version of ROS 2 that has reached its EOL (end-of-life), and is no longer officially supported. If you want up-to-date information, please have a look at Humble.
Migrating YAML parameter files from ROS 1 to ROS 2
This guide describes how to adapt ROS 1 parameters files for ROS 2.
YAML file example
YAML is used to write parameters files in both ROS 1 and ROS 2. The main difference in ROS 2 is that node names must be used to address parameters. In addition to the fully qualified node name, we use the key “ros__parameters” to signal the start of parameters for the node.
For example, here is a parameters file in ROS 1:
lidar_name: foo lidar_id: 10 ports: [11312, 11311, 21311] debug: true
Let’s assume that the first two parameters are for a node named
/lidar_ns/lidar_node_name, the next parameter is for a node named
/imu, and the last parameter we want to set on both nodes.
We would construct our ROS 2 parameters file as follows:
/lidar_ns: lidar_node_name: ros__parameters: lidar_name: foo id: 10 imu: ros__parameters: ports: [2438, 2439, 2440] /**: ros__parameters: debug: true
Note the use of wildcards (
/**) to indicate that the parameter
debug should be set on any node in any namespace.