shinyHugePlot

CRAN status

The goal of shinyHugePlot is to efficiently visualize the data with a large sample size, such as long time-series data. Using this package, a small number of samples are obtained automatically from large-sized data. Moreover, it can interactively change the samples according to the data range defined by the user using plotly interfaces.

For instance, assume that there is a data with a sample size of 1e8.

Without this package, many charts are required: one for illustrating the overall trend and ones for illustrating small parts of the data. To display the overall trend is necessary; however, it requires a large amount of time. It may be difficult to correctly illustrate the entire data because of the graphical resolution. Dividing the data into intervals and calculating statistical values, such as mean values, may be a good approach for avoiding such problems; however, it also requires a great amount of effort and slight fluctuations in the data will be lost. It is frequently necessary to extract a specific part of data to study slight fluctuations; however, it also requires a great amount of effort.

Using this package, data with a large sample size are visualized easily, quickly, and without errors. Small number of samples are automatically obtained on a basis of specific algorithms, which helps in understanding the overall trend of the data. Zooming up the data (using plotly interfaces) automatically provides new samples and slight fluctuations in the data are displayed. Both the overall and slight fluctuations of the data can be accurately understood.

Installation

You can install shinyHugePlot from CRAN like so:

install.packages("shinyHugePlot")

Or you can install the developing version of the package from gitlab like so:

install.packages("remotes")
remotes::install_gitlab("jtagusari/shinyHugePlot")

Example

Data

Before showing the example, the data with large sample size is prepared as follows:

library(tidyverse)
library(nanotime)

d <- tibble::tibble(
    x = seq(0, 1e6),
    t = nanotime::nanotime(Sys.time()) + seq(0, 1e6) * 7e4,
    y1 = rnorm(1) * 1000 + (runif(1) * sin(x / 200) + sin(runif(1) * x / 200) + runif(1e6 + 1) / 10) * x / 1e3,
    y2 = rnorm(1) * 1000 + (runif(1) * sin(x / 200) + sin(runif(1) * x / 200) + runif(1e6 + 1) / 10) * x / 1e3,
    y3 = rnorm(1) * 1000 + (runif(1) * sin(x / 200) + sin(runif(1) * x / 200) + runif(1e6 + 1) / 10) * x / 1e3,
    y4 = rnorm(1) * 1000 + (runif(1) * sin(x / 200) + sin(runif(1) * x / 200) + runif(1e6 + 1) / 10) * x / 1e3,
    y5 = rnorm(1) * 1000 + (runif(1) * sin(x / 200) + sin(runif(1) * x / 200) + runif(1e6 + 1) / 10) * x / 1e3
  )

d_long <- tidyr::pivot_longer(d, cols = -c(x, t))

Easy example

The following example is the easiest.

library(shinyHugePlot)
shiny_hugeplot(d$y1)

shiny_hugeplot can also take x and y values. Numeric x and datetime x are applicable.

shiny_hugeplot(d$t, d$y1)

A shiny app will be running in the R-studio viewer. The original data has 1e6 samples while only 1e3 samples (default) are shown to reduce computational time. Try zooming up the plot (using plotly interfaces) and confirm that more samples are displayed according to the operation.

Note that a rough explanation about down-sampling is displayed in the legends. For example, the legend name of [S] trace 1 ~1.0K means that the name of the displayed series is “trace 1” and that one sample is generated for every 1.0K (= 1000) samples using a specific down-sampling algorithm.

Plotly example

The plot is based on plotly, so creating a plotly object and using it is a good option to use this package:

library(plotly)
fig <- plot_ly() %>%
  add_trace(x = d$t, y = d$y1, type = "scatter", mode = "lines") %>% 
  layout(xaxis = list(type = "date"))

shiny_hugeplot(fig)

You should note that building plotly data may require a large amount of computational time. For instance, an example below requires 30 secs in the author’s environment.

system.time({
  fig <- plot_ly(
    x = d_long$t, y = d_long$value, name = d_long$name,
    type = "scatter", mode = "lines"
    ) %>% 
    layout(xaxis = list(type = "date"))
  
  fig_b <- plotly::plotly_build(fig)
  })

it is improved by a plotly_build_light function (in the author’s environment, it takes approx 0.3 secs):

system.time({
  fig <- plot_ly(
    x = d_long$t, y = d_long$value, name = d_long$name,
    type = "scatter", mode = "lines"
    ) %>% 
    layout(xaxis = list(type = "date"))
  fig_b <- plotly_build_light(fig)
  })

Formula can also be applied,

system.time({
  fig_ev <- plot_ly(
    x = ~t, y = ~value, name = ~name, data = d_long,
    type = "scatter", mode = "lines"
    ) %>% 
    layout(xaxis = list(type = "date"))
  fig_ev_b <- plotly_build_light(fig)
  })

Creating a shiny app is easily done with shiny_hugeplot and the plotly object.

shiny_hugeplot(fig_b)

Multiple series is also supported. Note that applying plotly_build_light before subplot reduces time for computation.

d1 <- dplyr::filter(d_long, name %in% c("y1", "y2"))
d2 <- dplyr::filter(d_long, name %in% c("y3", "y4", "y5"))

fig_1 <- plot_ly(
  x = ~x, y = ~value, name = ~name, data = d1,
  type = "scatter", mode = "lines"
  ) 

fig_2 <- plot_ly(
  x = ~x, y = ~value, name = ~name, data = d2,
  type = "scatter", mode = "lines"
  ) 

fig_merged <- subplot(
  plotly_build_light(fig_1),
  plotly_build_light(fig_2),
  nrows = 2, shareX = TRUE
)

shiny_hugeplot(fig_merged)

Shiny example

The layout of the plot(s) is controlled by shiny. You can customize the layout.

fig <- plot_ly(x = d$x, y = d$y, type = "scatter", mode = "lines") 

ds <- downsampler$new(figure = fig)

ui <- fluidPage(
  plotlyOutput(outputId = "hp", width = "800px", height = "600px")
)

server <- function(input, output, session) {
  output$hp <- renderPlotly(ds$figure)
  observeEvent(plotly::event_data("plotly_relayout"),{
    updatePlotlyH(session, "hp", plotly::event_data("plotly_relayout"), ds)
  })
}

shinyApp(ui = ui, server = server)

Another series can be added using add_trace method registered in downsampler instance. By setting null_aggregator, all values are plotted in the figure. However, it is not plotted when the sample size is just 1, of which reason is under investigation.

fig <- plot_ly(x = d$x, y = d$y1, type = "scatter", mode = "lines") 

ds <- downsampler$new(figure = fig)
ds$add_trace(
  x = c(1e4,2e4,3e4), y = c(1000, 1000,1000), 
  type = "scatter", mode = "markers", 
  marker = list(color = "red"),
  aggregator = null_aggregator$new()
  )

ds$update_trace(reload = T)

shiny_hugeplot(ds)

Example for changing the aggregator

The down-sampling is, by default, done with the local minimum and maximum values (see min_max_aggregator). You can select several another down-sample method with the user interface given by shiny_hugeplot, and moreover, can explicitly select the one as follows:

fig <- plot_ly(x = d$x, y = d$y1, type = "scatter", mode = "lines") 
shiny_hugeplot(fig, n_out = 100, aggregator = range_stat_aggregator$new())
fig <- plot_ly(x = d$x, y = d$y1, type = "scatter", mode = "lines") 
shiny_hugeplot(fig, aggregator = eLTTB_aggregator$new())

LICENSE

This package is distributed with the MIT license.

ACKNOWLEDGMENT

Development of this package was inspired by the python package of plotly_resampler (https://github.com/predict-idlab/plotly-resampler).