Getting Started With {hagis}

The following examples are based on a dataset from Michigan State University Phytophthora sojae surveys for soybean phytophthora root rot pathotyping efforts.

First you’ll want to load in your data set, for right now let’s use a practice data set made for the {hagis} package, named P_sojae_survey. The data set is available in your R session automatically when you load the {hagis} package.

library("hagis")
head(P_sojae_survey)
#>    Isolate         Line         Rps Total HR (1) Lesion (2)
#> 1:       1     Williams susceptible    10      0          0
#> 2:       1       Harlon          1a    10      4          0
#> 3:       1 Harosoy 13xx          1b     8      0          0
#> 4:       1     L75-3735          1c    10     10          0
#> 5:       1    PI 103091          1d     9      2          0
#> 6:       1  Williams 82          1k    10      0          0
#>    Lesion to cotyledon (3) Dead (4) total.susc total.resis perc.susc perc.resis
#> 1:                       0       10         10           0       100          0
#> 2:                       0        6          6           4        60         40
#> 3:                       0        8          8           0       100          0
#> 4:                       0        0          0          10         0        100
#> 5:                       1        6          7           2        78         22
#> 6:                       0       10         10           0       100          0

We see in the gene column that each gene is prepended with “Rps”. We can remove this to make the graphs cleaner and report the genes in tables as we would in a manuscript. Note that this will work for any string you enter as the first value, pattern. The second string, replacement, is the replacement value, the third, x, is where to look and make the changes.

P_sojae_survey$Rps <-
  gsub(pattern = "Rps ",
       replacement = "",
       x = P_sojae_survey$Rps)
head(P_sojae_survey)
#>    Isolate         Line         Rps Total HR (1) Lesion (2)
#> 1:       1     Williams susceptible    10      0          0
#> 2:       1       Harlon          1a    10      4          0
#> 3:       1 Harosoy 13xx          1b     8      0          0
#> 4:       1     L75-3735          1c    10     10          0
#> 5:       1    PI 103091          1d     9      2          0
#> 6:       1  Williams 82          1k    10      0          0
#>    Lesion to cotyledon (3) Dead (4) total.susc total.resis perc.susc perc.resis
#> 1:                       0       10         10           0       100          0
#> 2:                       0        6          6           4        60         40
#> 3:                       0        8          8           0       100          0
#> 4:                       0        0          0          10         0        100
#> 5:                       1        6          7           2        78         22
#> 6:                       0       10         10           0       100          0

This practice data set contains 21 isolates’, Isolate, virulence data on a set of 14 differential soybean cultivars, Line. This package uses the percentage of susceptible, inoculated, plants to determine effective resistance genes, pathotype diversity and frequency, as well as individual isolates pathotypes.

To help ensure that the proper data are used in calculations, the user is asked to provide some information that instruct {hagis} about what data to use.


## Function Arguments Used in {hagis}

We have striven to make {hagis} as intuitive to use as possible. Part of that means that we have used the same arguments for the three main functions, summarize_gene(), calculate_complexities() and calculate_diversities(). Each of these functions take the same arguments:

Ordinarily you would use functions in {hagis} or other R packages like this:

Rps.summary <- summarize_gene(
  x = P_sojae_survey,
  cutoff = 60,
  control = "susceptible",
  sample = "Isolate",
  gene = "Rps",
  perc_susc = "perc.susc"
)

However, because the functions share arguments we can create a list() of arguments and share them with some of the functions from {hagis}. First, we make a list of the arguments that summarize_gene(), calculate_diversities() and calculate_complexities() use that specify our inputs based on our example data:

hagis_args <- list(
  x = P_sojae_survey,
  cutoff = 60,
  control = "susceptible",
  sample = "Isolate",
  gene = "Rps",
  perc_susc = "perc.susc"
)

Now that we have a list of arguments, we can now save time entering the same data for each function and also avoid typos or entering different cutoff values, etc. between the functions.


Determination of Effective Resistance Genes

Below is an example of tables and graphics that can be produced using the summarize_gene() function to identify effective resistance genes tested against the sampled Phytophthora sojae population.

The summarize_gene() function allows you to produce a detailed table showing the number of virulent isolates (N_virulent_isolates), as well as offering a percentage of the isolates tested which are pathogenic on each gene (percent_pathogenic).

Rps.summary <- do.call(summarize_gene, hagis_args)

Rps.summary
#>            gene N_virulent_isolates percent_pathogenic
#>  1: susceptible                  21          100.00000
#>  2:          1a                  21          100.00000
#>  3:          1b                  15           71.42857
#>  4:          1c                  20           95.23810
#>  5:          1d                  16           76.19048
#>  6:          1k                  18           85.71429
#>  7:           2                  14           66.66667
#>  8:          3a                   5           23.80952
#>  9:          3b                  20           95.23810
#> 10:          3c                   4           19.04762
#> 11:           4                   5           23.80952
#> 12:           5                  13           61.90476
#> 13:           6                  11           52.38095
#> 14:           7                  21          100.00000

Using the pander library we can make the table much more attractive in RMarkdown.

library(pander)

pander(Rps.summary)
gene N_virulent_isolates percent_pathogenic
susceptible 21 100
1a 21 100
1b 15 71.43
1c 20 95.24
1d 16 76.19
1k 18 85.71
2 14 66.67
3a 5 23.81
3b 20 95.24
3c 4 19.05
4 5 23.81
5 13 61.9
6 11 52.38
7 21 100

Plotting Rps Summary Data

{hagis} also provides functions to quickly graph your data using {ggplot2}.

Two functions are provided to plot the summary depending on your needs. If you need the frequency, use autoplot(Rps.summary, type = "percentage"), or if you desire the distribution autoplot(Rps.summary, type = "count"). Both return the same graph, only the y-axis change; percent for frequency and n for distribution.

autoplot(Rps.summary, type = "percentage")


autoplot(Rps.summary, type = "count")


Pathotype Complexities

Pathotype frequency, distribution as well as statistics such as mean pathotype complexity can be calculated using the calculate_complexities() function. This function will return a list() of two data.table() objects, grouped_complexities and individual_complexities. grouped_complexities returns a list() as a data.table() object showing the frequency and distribution of pathotype complexities for the sampled population. individual_complexities() returns a list() as a data.table() object showing each individual isolates pathotype complexity. An isolates pathotype complexity refers to the number of resistance genes that it is able to overcome and cause disease on, i.e., a pathotype complexity of “7” would mean that isolate can cause disease on 7 different resistance genes.

complexities <- do.call(calculate_complexities, hagis_args)

complexities
#> 
#> Grouped Complexities
#>     complexity frequency distribution
#>  1:          1         0            0
#>  2:          2         0            0
#>  3:          3         0            0
#>  4:          4         0            0
#>  5:          5         1            1
#>  6:          6         2            2
#>  7:          7         2            2
#>  8:          8         7            7
#>  9:          9         0            0
#> 10:         10         5            5
#> 11:         11         3            3
#> 12:         12         0            0
#> 13:         13         1            1
#> 
#> 
#> Individual Complexities
#>     sample N_samp
#>  1:      1     10
#>  2:      2     10
#>  3:      3     10
#>  4:      4      8
#>  5:      5      8
#>  6:      6      8
#>  7:      7      8
#>  8:      8      8
#>  9:      9      6
#> 10:     10      5
#> 11:     11      6
#> 12:     12      8
#> 13:     13      7
#> 14:     14      8
#> 15:     15     11
#> 16:     16      7
#> 17:     17     10
#> 18:     18     10
#> 19:     19     11
#> 20:     20     11
#> 21:     21     13
#>     sample N_samp

Once again, using pander we can make these tables much more attractive in RMarkdown. Since complexities is a list() object, we can refer to each object directly by name and print them as follows.

pander(complexities$grouped_complexities)
complexity frequency distribution
1 0 0
2 0 0
3 0 0
4 0 0
5 1 1
6 2 2
7 2 2
8 7 7
9 0 0
10 5 5
11 3 3
12 0 0
13 1 1

pander(complexities$indvidual_complexities)
sample N_samp
1 10
2 10
3 10
4 8
5 8
6 8
7 8
8 8
9 6
10 5
11 6
12 8
13 7
14 8
15 11
16 7
17 10
18 10
19 11
20 11
21 13

Using summary() will return the mean, standard error (se) and standard deviation (sd) for pathotypes of a complexities object.

pander(summary(complexities))
Mean SD SE
8.714 2.004 0.4372

Plotting Complexities Data

Two functions are provided to plot the complexities depending on your needs. If you need the frequency, use autoplot(complexties, type = "percentage"), or if you desire the distribution autoplot(complexities, type = "count"). Both return the same graph, only the y-axis change; percent for frequency and n for distribution.

autoplot(complexities, type = "percentage")


autoplot(complexities, type = "count")


Diversity Indices, Frequency of Unique Pathotypes and Individual Isolate Pathotypes

Diversity indices are extremely useful when trying to identify differences between two populations. Here, pathotype diversities are calculated for the isolate population using the calculate_diversities() function. Likewise, individual isolates’ pathotypes, number of isolates used in the study, number of pathotypes within the study are calculated.

Five diversity indices are calculated when calling calculate_diversities().

diversity <- do.call(calculate_diversities, hagis_args)
diversity
#> 
#> hagis Diversities
#> 
#> Number of Samples 21
#> Number of Pathotypes 19 
#> 
#> Indices
#> Simple   0.9047619 
#> Gleason  5.912257 
#> Shannon  2.912494 
#> Simpson  0.9433107 
#> Evenness  0.9891509

Or using pander for reporting, a nice table is generated.

pander(diversity)
Diversity indices where n = 21 with 19 pathotypes.
Simple Gleason Shannon Simpson Evenness
0.9048 5.912 2.912 0.9433 0.9892

Table of Diversities

To generate a table of diversities, use diversities_table(). {hagis} will automatically create a pander object for you. This is because it is much easier to read the resulting table in the console than the raw data.frame and insert into reports.

diversities_table(diversity)
Frequency Pathotype
1 1a, 1b, 1c, 1d, 1k, 2, 3a, 3b, 3c, 4, 5, 6, 7
1 1a, 1b, 1c, 1d, 1k, 2, 3a, 3b, 3c, 5, 7
1 1a, 1b, 1c, 1d, 1k, 2, 3a, 3b, 3c, 6, 7
1 1a, 1b, 1c, 1d, 1k, 2, 3b, 4, 5, 6, 7
1 1a, 1b, 1c, 1d, 1k, 2, 3b, 4, 5, 7
1 1a, 1b, 1c, 1d, 1k, 2, 3b, 4, 6, 7
2 1a, 1b, 1c, 1d, 1k, 2, 3b, 7
1 1a, 1b, 1c, 1d, 1k, 2, 6, 7
1 1a, 1b, 1c, 1d, 1k, 3a, 3b, 5, 6, 7
1 1a, 1b, 1c, 1d, 1k, 3b, 7
1 1a, 1b, 1c, 1k, 2, 3b, 3c, 4, 6, 7
1 1a, 1b, 1c, 1k, 3b, 5, 6, 7
1 1a, 1b, 1c, 1k, 3b, 5, 7
1 1a, 1b, 1d, 1k, 2, 3a, 3b, 5, 6, 7
2 1a, 1c, 1d, 1k, 2, 3b, 5, 7
1 1a, 1c, 1d, 1k, 2, 3b, 6, 7
1 1a, 1c, 1d, 3b, 5, 7
1 1a, 1c, 3b, 5, 6, 7
1 1a, 1c, 3b, 5, 7

To generate a table of individual pathotypes, use individual_pathotypes(). Here again, {hagis} provides a pander object for ease of use.

Table of Individual Pathotypes

individual_pathotypes(diversity)
Sample Pathotype
1 1a, 1b, 1d, 1k, 2, 3a, 3b, 5, 6, 7
10 1a, 1c, 3b, 5, 7
11 1a, 1c, 3b, 5, 6, 7
12 1a, 1b, 1c, 1d, 1k, 2, 6, 7
13 1a, 1b, 1c, 1d, 1k, 3b, 7
14 1a, 1b, 1c, 1k, 3b, 5, 6, 7
15 1a, 1b, 1c, 1d, 1k, 2, 3b, 4, 5, 6, 7
16 1a, 1b, 1c, 1k, 3b, 5, 7
17 1a, 1b, 1c, 1d, 1k, 2, 3b, 4, 5, 7
18 1a, 1b, 1c, 1d, 1k, 3a, 3b, 5, 6, 7
19 1a, 1b, 1c, 1d, 1k, 2, 3a, 3b, 3c, 6, 7
2 1a, 1b, 1c, 1k, 2, 3b, 3c, 4, 6, 7
20 1a, 1b, 1c, 1d, 1k, 2, 3a, 3b, 3c, 5, 7
21 1a, 1b, 1c, 1d, 1k, 2, 3a, 3b, 3c, 4, 5, 6, 7
3 1a, 1b, 1c, 1d, 1k, 2, 3b, 4, 6, 7
4 1a, 1c, 1d, 1k, 2, 3b, 5, 7
5 1a, 1c, 1d, 1k, 2, 3b, 6, 7
6 1a, 1c, 1d, 1k, 2, 3b, 5, 7
7 1a, 1b, 1c, 1d, 1k, 2, 3b, 7
8 1a, 1b, 1c, 1d, 1k, 2, 3b, 7
9 1a, 1c, 1d, 3b, 5, 7

Advanced Plotting

{hagis} autoplot() Objects

Since {hagis} uses {ggplot2} to generate its plots, you can easily theme the outputs using common {ggplot2} themes and other options provided by {hagis} directly through autoplot().

library(ggplot2)

Rps.plot <- autoplot(Rps.summary, type = "percentage")

Rps.plot

Changing the ggplot2 Theme

Use {ggplot2}’s theme_minimal() theme.

Rps.plot <- Rps.plot +
  theme_minimal()

Rps.plot

Changing the Font

Set the font to be a bold-face serif family font.

Rps.plot <- Rps.plot +
  theme(text = element_text(face = "bold",
                            family = "serif"))

Rps.plot

Make a Horizontal Plot

If your Rps gene names are too long, flipping the axis can make the graph more legible without rotating the x-axis labels.

Rps.plot <- Rps.plot +
  coord_flip()

Rps.plot

Use Colors in Autoplot Objects

You can use named, e.g., “red”, “yellow”, “blue”, colors in R or you can use custom hexadecimal color codes. Illustrated below is using Michigan State University (MSU) Green, hex code #18453b, using theme_bw() with a serif font.

autoplot(Rps.summary,
         type = "percentage",
         color = "#18453b") +
  theme_bw() +
  theme(text = element_text(face = "bold",
                            family = "serif"))

Sorting the x-axis

You can sort the x-axis of any graph produced using autoplot() in an ascending or descending order using the order parameter in autoplot().

autoplot(Rps.summary,
          type = "percentage",
          color = "#18453b",
          order = "ascending") +
  theme_bw() +
  theme(text = element_text(face = "bold",
                            family = "serif"))