A variable and changing climate presents significant challenges to the functioning and/or performance of both natural and engineered systems. Managed systems—both engineered and managed natural systems—traditionally have been designed under the assumption that future climate conditions will mirror those experienced in the past. Yet with the continuing advance of climate change, there is a need to understand how systems might perform under a range of plausible future climate conditions or, conversely, what system interventions might be required so that systems continue to achieve desired levels of performance. Given the complexity of most climate-sensitive systems, formalised approaches are required to understand likely climate impacts and evaluate the viability of adaptive measures to minimise climate vulnerability.
To this end, scenario-neutral (or ‘bottom-up’) approaches (Prudhomme et al. 2010, Brown 2011, Culley et al. 2016) are advocated as a means of rigorously stress testing a system under a range of plausible future climate conditions. These approaches treat the system’s behaviour and performance as the central concerns of the analysis, and enable better understanding of the complex climate-system relationships to support adaptation decision making. These approaches can be combined with ‘top-down’ climate impact assessment methods through the integration of projections from climate models and/or other lines of evidence. The foreSIGHT package contains functions that support both ‘bottom-up’ system stress testing, and the analysis of the implication of ‘top-down’ climate projections on system performance.
This vignette demonstrates the high-level work flow of climate ‘stress-testing’ using the foreSIGHT package. The document is intended as a quick start guide and uses a highly simplified case study of a rainwater tank system model to demonstrate how the functions in the package can be used together. The vignette makes numerous assumptions that may not be appropriate for a realistic case study, and the reader is referred to the Detailed Tutorial for more detailed description of full foreSIGHT functionality.
The objectives of foreSIGHT are to support climate impact and vulnerability assessments and the assessment of adaptation options by:
The foreSIGHT modelling software adopts a rigorous quantitative approach to stress testing, that has been designed with several core assumptions in mind:
Indeed, it is this latter feature that gives the software its name (the SIGHT in foreSIGHT stands for System Insights from the Generation of Hydroclimatic Timeseries). In particular, foreSIGHT has been designed specifically for the quantitative analysis of systems that exhibit dynamics in time, with examples of such systems including:
The focus on detailed numerical modelling and system ‘stress testing’ highlights that foreSIGHT is particularly suited to situations where the consequences of system performance degradation and/or failure as a result of climate change are likely to be significant, as well as for quantitative decision making and/or engineering design. It is assumed that a high-level (qualitative) risk assessment would have already been conducted and the outcome of that assessment is that a detailed quantitative analysis is required.
The foreSIGHT workflow is shown the diagram below, and comprises five distinct steps that are further described in the paragraphs below. A core aspect of the foreSIGHT functionality is to evaluate how the system performs under a range of plausible climate scenarios created by perturbing statistical properties of observed climate time series. The workflow involves the steps shown in the following diagram, each of which are discussed in the case study presented in Section 2. As highlighted in the previous section, at this point it is assumed that a detailed quantitative analysis of a system is required (based, for example, on the outcomes of a qualitative risk assessment) and that a numerical system model is available.
Step A. The process of system stress testing involves assessing how a system’s behaviour (including its ‘function’ or ‘performance’) varies as a result of plausible climatic changes. These changes are described by means of climate “attributes”, which we define as statistical measures of weather variables. Examples of attributes are annual total rainfall, annual number of wet days, and annual average temperature. In this step, the attributes that are deemed to be most relevant for a particular system are identified. These attributes are generally selected based on a priori understanding of system dynamics and likely system vulnerability. The maximum-minimum bounds of the perturbations in the selected attribute, and the type of sampling within this range are also decided. The attributes and perturbations are used to create an exposure space. The outcome of this step is a set of sampled points within an exposure space, that provide the ‘targets’ for time series generation algorithms in Step B.
Step B. This step involves generation of perturbed time series corresponding to the sampled points of target perturbations created in Step A. A reference (typically observed) time series of the relevant hydro-climate variables is required to create the perturbed time series using a selected method of perturbation. The supported perturbation methods in foreSIGHT include the application of scaling factors to the supplied time series, or the use of the ‘inverse method’ of Guo et al (2018) to optimise the parameters of stochastic weather generator type models to generate time series with desired perturbed attributes. If stochastic models are used for time series generation, multiple replicates of time series that correspond to the same target can be generated to better represent stochastic (‘natural’) variability. The outcome of this step is a set of perturbed time series that correspond as closely as possible to each point in the exposure space.
Step C. The perturbed time series generated in Step B are used to drive the system model and simulate system ‘performance’. The performance metrics should represent measures that are most relevant to the system under consideration, and can include a variety of economic, social and/or environmental measures. It is assumed that the performance metrics are calculated within the system model and thus represent the outputs from that model (i.e. the foreSIGHT package does not calculate the performance metrics itself). The outcome of this step is a quantitative representation of how system performance varies across the exposure space.
Step D. This step visualises the system performance metrics calculated in step C to understand the system responses to the perturbations in the selected climate attributes. If minimum or maximum threshold criteria of the performance metrics are defined, these thresholds can be used to identify instances of unsatisfactory system performance/system failure. In this step, the performance metrics are visualised in the perturbation space of the climate attributes, i,e, the axes used for visualisation are the perturbed climate attributes. Such figures are henceforth named “performance spaces”—these visualisations enable identification of combinations of perturbations that result in changes to system performance. In cases where the ‘stress-test’ includes multiple perturbed attributes and performance metrics, multiple visualisations of performance spaces are used to represent all combinations of attributes/metrics. If alternate climate information is available from other sources of evidence (eg: ‘top-down’ approaches), they can be superimposed on the visualisations generated in this step. Inclusion of this additional climate data may provide information about the plausibility of the perturbations in the attributes. The outcome of this step are plots of the system performance spaces/thresholds and understanding of the system responses to the climate perturbations.
Step E. This step involves analysis of alternate system configurations/policies in order to support decision making. Visualisations are created for the alternate system choices to compare their performance. The outcome of this step are plots of the performance spaces/thresholds for all system choices and understanding of the preferred choices under climate perturbations.
These five steps complete the framework of climate impact assessment using foreSIGHT.
Several parts of the foreSIGHT workflow can involve significant computational effort and thus runtimes. This is particularly relevant for Step B (generation time series that represent the target attributes) and Step C (simulating the time series through the system model), and depends on the approach to perturbation and selected system model, respectively. In relation to perturbation methods, there are multiple ways to perturb historical weather time series, from application of additive or multiplicative factors to historical weather data through to the use of sophisticated stochastic generators. To support fast run times, in this example we adopt the ‘simple scaling’ approach of adding/subtracting a constant to historical temperature and multiplying precipitation by a percentage relative to historical. However, this method has the following limitations:
The implication of the above is that key modes of system vulnerability may be missed by adopting the ‘simple scaling’ approach. The user should consider these points while using foreSIGHT for other case studies, with further description of the use of more sophisticated approaches for time series perturbation, including ‘seasonal scaling’ and stochastic weather generators, provided in the Detailed Tutorial.
Given the diversity of possible use-cases and heterogeneity of system models, foreSIGHT itself does not have system modelling capabilities, but instead is designed to flexibly integrate with a range of system models that are either written in R, or written in a different language but can be coupled to R via wrapper functions. Details on system model coupling to foreSIGHT are provided in the Detailed Tutorial.
To explore and illustrate key elements of foreSIGHT functionality, an inbuilt rainwater tank system model is provided as part of the software package. The system model is a representation of a domestic rainwater tank system, which has been designed to meet both indoor (grey water) and outdoor (garden irrigation) water demands. Although this system model example is simpler than anticipated real-world usages of the foreSIGHT model, it nevertheless provides important insights associated with system sensitivities, the role of temporal dynamics and the behaviour of storages, the interaction between supply and demand, and the identification and comparison of multiple system configurations. The core functionality of this model is now described.
A schematic representation of the rainwater tank system model is shown in the figure below. Rain falling on the roof of a house is captured and directed towards the rainwater tank. Before the rainwater is able to enter the tank, a depth of water (called the first flush) is removed from the start of each storm for water quality reasons. The water remaining after the first flush extraction flows into the rainwater tank. The amount of water supplied by the tank is calculated based on the water level in the tank. The indoor and outdoor water demands deplete the water stored in the tank. The indoor water demand is assumed to be constant throughout the year, and the outdoor water demand varies seasonally. The outdoor seasonal demand pattern is also dependent upon the daily temperature. For example, on hot days (say above 28oC), the gardener is assumed to apply more than the seasonal average and vice versa. The operation of the rain water tank system model is thus dependent upon the climate variables rainfall and temperature.
The tank model simulates rainwater capture and water use processes at a daily time step using rainfall and temperature time series as input. The parameters of the model that the user should specify are: the area of the roof used for rain water harvesting, the volume of the tank, the number of people using the water and the depth of water removed as the first flush. These parameters can be varied for alternate system designs.
The system model estimates the performance of the rainwater tank using five metrics:
This example system model provides sufficient scope for climate
stress testing using foreSIGHT. This is because the tank
responds to multiple climate drivers (i.e. rainfall and temperature),
and the removal of the first flush at the start of the storm means that
the wet-dry pattern of the rainfall and the seasonality of the demand
pattern may become important in the functioning of the tank. The system
model is available as the
tankWrapper() function in
foreSIGHT. The performance metrics available in the tank model
can be viewed using the
Daily observed precipitation and temperature over the period from 2007 to 2016 obtained by combining data from multiple station locations to represent the general climate of Adelaide, South Australia is included in the demonstration, and may be be loaded using the data command.
A typical function call to the rainwater tank system model
tankWrapper) is shown below. The call returns the system
performance metrics specified by the user.
# Load example climate data data(tankDat) # View the metrics available for use <- viewTankMetrics() tankMetrics #>  "volumetric reliability (fraction)" "reliability (fraction)" #>  "system efficiency (%)" "storage efficiency (%)" #>  "average tank storage (L)" "average daily deficit (L)" # User input: system model parameters <- list(roofArea = 50, # roof area in m2 systemArgs nPeople = 1, # number of people using water tankVol = 3000, # tank volume in L firstFlush = 1, # depth of water removed each event in mm write.file = FALSE, # write output tank timeseries to file T/F? fnam = "tankperformance.csv") # name of file # performance metric chosen for reporting <- c("average daily deficit (L)", "reliability (fraction)") metrics <- tankWrapper(data = tank_obs, systemArgs = systemArgs, metrics = metrics) performanceOut performanceOut#> $`average daily deficit (L)` #>  40.93813 #> #> $`reliability (fraction)` #>  0.6884752 # Now try a different metric e.g. volumetric reliability <- tankWrapper(data = tank_obs, systemArgs = systemArgs, metrics = tankMetrics) performanceOut performanceOut#> $`volumetric reliability (fraction)` #>  0.4380711
The section demonstrates how foreSIGHT can be used to climate ‘stress-test’ the rain water tank system model under a range of plausible climate scenarios created by perturbing the attributes of the observed climate time series. This is achieved through the application of a framework involving the steps shown in the workflow in section 1.2.
createExpSpace can be used to create an
exposure space. The term ‘exposure space’ refers to the perturbed values
of the attributes of weather time-series that form the basis of stress
testing, representing the ‘exposure’ element of a traditional climate
impact assessment. For example, an exposure space may consist of
multiplicative perturbations of 0.8 to 1 in annual total precipitation,
and 0.8 to 1.2 in mean annual number of wet days.
To use the function
createExpSpace, the user should
provide information on the following:
These are discussed in turn.
Choice of which attributes to perturb. The selection
of attributes to perturb is given by the argument
attPerturb, and selection of attributes to be held at
historical levels given by the argument
attHold. The choice
of which attributes to select for perturbation depends upon the
anticipated sensitivity of the system; it is an important choice, but
outside the scope of the work flow demonstrated in this vignette. When
using stochastic models to generate the perturbed time series, it is
important to specify
attHold in addition to
attPerturb to ensure that physically realistic time series
are generated. This issue is discussed further in the Detailed Tutorial
Number of ranges and number of samples/increments.
For each perturbed attribute, the maximum-minimum values of perturbation
attPerturbMax) should be
specified, as well as either the number of samples to be generated
attPerturbSamp) or the sampling increment
attPerturbBy). The perturbations in the attributes of
variables like rainfall are specified in multiplicative units, while the
perturbations in the attributes of variables like temperature are
specified in additive units. The function
uses this information to create equidistant perturbation points between
the minimum-maximum values. For example, if
of an attribute of rainfall is specified as 0.9,
attPerturbMax as 1.1, and
attPerturbSamp as 3,
the perturbation points of the attribute will be 0.9, 1, and 1.1.
Sampling Strategy. The function argument
attPerturbType can be used to specify the type sampling of
the exposure space. Please refer to function documentation using
?createExpSpace to check the options available in the
package. Two common sampling approaches are ‘one-at-a-time’ (OAT), and
‘regGrid’ sampling. In the case of a ‘OAT’ sampling, each attribute is
perturbed one-at-a-time while holding all other attributes constant. In
contrast, in a ‘regGrid’ sampling the attributes are perturbed
simultaneously to create an exposure space encompassing all combination
of perturbations in the selected attributes.
Attributes in foreSIGHT are specified as combinations of
variables names (e.g. “P” for precipitation), stratification type
(e.g. “ann” for annual), function name (e.g. “tot” for total), and
operation (e.g. “m” for mean over years). Please refer to the Detailed
Tutorial for further details on attribute definitions.
The definitions of climate attributes supported by foreSIGHT can be viewed using the helper function
available in the package.
viewAttributeDef("P_ann_tot_m") #>  "Mean annual total rainfall"
The combinations of perturbed attributes specified by the user
provide the intended sampling of the exposure space. The function
createExpSpace can be used to create an exposure space by
attPerturb and relevant information regarding
the sampling strategy for each attribute, as well as
attHold. A typical usage of this function is shown below.
attHold is set to
NULL since the
method of ‘simple scaling’ will be used in Step B to generate perturbed
time series, and this method does not have the capability to hold
desired attributes at historical levels. The function
plotExpSpace can be used to plot and check the range and
sampling resolution of a created 2D exposure space.
In the below function call, the attribute
is perturbed from -1oC to 1oC relative to the
historical average using 9 samples between the sampling bounds, and the
P_ann_tot_m from 80% to 120% of the historical
average using 13 samples between the sampling bounds.
# specify perturbed attributes <- c("Temp_ann_avg_m", "P_ann_tot_m") attPerturb # specify perturbation type and minimum-maximum ranges of the perturbed attributes <- "regGrid" attPerturbType <- c(9, 13) attPerturbSamp = c(-1, 0.80) attPerturbMin = c(1, 1.2) attPerturbMax # create the exposure space <- createExpSpace(attPerturb = attPerturb, expSpace attPerturbSamp = attPerturbSamp, attPerturbMin = attPerturbMin, attPerturbMax = attPerturbMax, attPerturbType = attPerturbType, attHold = NULL) # no attributes held at historical levels #> Note: There are no attributes held at historical levels # plot the exposure space plotExpSpace(expSpace)
Each point in this exposure space is what is referred to as a ‘target’ location, in the sense that it describes the desired attribute values of the time series to be generated in Step B to inform the system stress test.
Alternately, the argument
attPerturbBy of the function
createExpSpace may be used to specify the increments in
perturbations instead of
attPerturbSamp. The below code
provides an example of this usage, which has been designed to generate
an equivalent exposure space compared to the earlier example.
# specify perturbed attributes <- c("Temp_ann_avg_m", "P_ann_tot_m") attPerturb # specify perturbation type and minimum-maximum ranges of the perturbed attributes <- "regGrid" attPerturbType <- c(0.25, 0.0333) # to be used instead of attPerturbSamp attPerturbBy = c(-1, 0.80) attPerturbMin = c(1, 1.2) attPerturbMax # create the exposure space <- createExpSpace(attPerturb = attPerturb, expSpace2 attPerturbSamp = NULL, # set to null attPerturbMin = attPerturbMin, attPerturbMax = attPerturbMax, attPerturbType = attPerturbType, attPerturbBy = attPerturbBy, attHold = NULL) #> Note: There are no attributes held at historical levels
Having created the exposure space and the target locations, the next
step is to created hydro-climate time series with these desired
attribute values. The function
generateScenarios can be
used to generate perturbed time series corresponding to all the target
locations in the exposure space. The function supports two types of
techniques for perturbation, (1) simple/seasonal scaling and (2)
stochastic simulation, the details of which can be controlled by the
user using the function argument
Simple/seasonal scaling applies an additive or multiplicative change to
the user-supplied observed time series to create perturbed time series,
whereas stochastic simulation uses one of several available stochastic
weather generators in combination with the inverse approach of Guo et
The capacity to generate tailored individual and joint changes to a variety of attributes, including annual averages, seasonality, variability, intermittency and extremes of a variety of hydroclimatic variables (e.g. rainfall, temperature, potential evapotranspiration, radiation) represents one of the core features of foreSIGHT, and requires the use of stochastic weather generation models as well as sophisticated calibration routines. Further information on application of stochastic models can be found in the Detailed Tutorial. Instead, this Quick Start Guide uses a technique called ‘simple scaling’ in which historical weather series are perturbed (or scaled) by a multiplicative or additive factor. This approach has significant limitations but is quick and easy to implement, and thus is used here for illustrative purposes.
The first step to implementing this approach is to supply observed
time series as input to
generateScenarios using the
reference. A typical function call to
generateScenarios is shown below, with the outputs of the
simulation saved to a list object called ‘sim’, which is then typically
used as an input to the system model as part of Step C. This object
contains perturbed time series for all the target locations in the
exposure space and the resulting simulation file is typically large in
size. The summary (metadata) of the simulation may be obtained using the
getSimSummary, which can be used as input to the
plotting functions in foreSIGHT.
Finally, note that because we are using simple scaling, only a single
perturbed weather time series is generated for each target, and that the
length of the weather time series is identical to the observed data
tank_obs. If stochastic simulation was used,
it becomes possible to generate weather time series of different
lengths, and also to generate multiple ‘realisations’ (or ‘replicates’)
of the perturbed weather time series for each target in order to
simulate stochastic variability (sometimes referred to as ‘weather
noise’). These issues are discussed further in the Detailed
# Load example reference climate data data(tankDat) # Expected format of the input reference climate data head(tank_obs) #> year month day P Temp #> 1 2007 1 1 0.0 25.50 #> 2 2007 1 2 0.0 24.50 #> 3 2007 1 3 0.0 29.75 #> 4 2007 1 4 0.0 32.25 #> 5 2007 1 5 0.0 32.50 #> 6 2007 1 6 4.5 26.50 # generate perturbed time series using simple scaling <- generateScenarios(reference = tank_obs, # input observed data sim expSpace = expSpace, # exposure space created by the user controlFile = "scaling") # using simple scaling #> Generating replicate number 1 out of 1 replicates... #> Simulation completed # get metadata for later use <- getSimSummary(sim)simSummary
To understand how the system responds to perturbations in the climate
attributes, it is necessary to run the system model for each of the
simulated weather time series in order to obtain one or several measures
of system performance that relate to each point in the exposure space.
The perturbed time series generated in the previous section can be used
to run the system model and calculate the system performance at all
locations in the exposure space using the function
runSystemModel requires a
perturbed simulation (
sim) and system model function
systemModel) as input arguments, as well as a list of
system model arguments (
systemArgs) that need to be
supplied to the system model, and a vector of performance metrics
metrics) that represent the system model output(s). This
case study uses as the system model the rainwater tank function,
tankWrapper() described in section 1.2.
A typical function call to
runSystemModel is shown
# define the arguments of the systemModel, here tankWrapper <- list(roofArea = 205, systemArgs nPeople = 1, tankVol = 2400, firstFlush = 2.0, write.file = FALSE) <- c("average daily deficit (L)", "reliability (fraction)", "volumetric reliability (fraction)") metrics # run the system model <- runSystemModel(sim = sim, # simulation; the perturbed time series systemPerf systemModel = tankWrapper, # the system model function systemArgs = systemArgs, # argument to the system model function metrics = metrics) # selected performance metrics # the output contains three performance metrics for all target locations ::str(systemPerf) utils#> List of 3 #> $ average daily deficit (L) : num [1:117, 1] 30.5 30.6 30.8 30.9 31 ... #> $ reliability (fraction) : num [1:117, 1] 0.779 0.779 0.778 0.778 0.777 ... #> $ volumetric reliability (fraction): num [1:117, 1] 0.577 0.576 0.576 0.575 0.575 ...
The output of
runSystemModel contains the values of the
performance metrics at all target locations in the exposure space.
The foreSIGHT package contains functions to plot the system
performance calculated using
runSystemModel. The output of
runSystemModel is termed the “performance space”
as it contains the system performance at each target location in the
exposure space. The performance plotting functions use the system
performance and the simulation summary as input arguments. There are
three functions to plot performance available in foreSIGHT.
Typical usages of these functions are demonstrated below using the case
plotPerformanceOAT: The function plots lines showing
the changes in a system performance metric with one-at-a-time (OAT)
perturbations in attributes. This function is intended for use with an
“OAT” exposure space, assuming all other attributes are held constant
(usually at their historical levels). However, if “OAT” perturbations
exist in a “regGrid” exposure space, the function will subset these
targets to create the plots. This subset can be thought of as a slice
through the exposure space when the other attributes are kept at
historical levels. If the exposure space does not contain attribute
values at historical levels, the “OAT” plots cannot be created.
plotPerformanceOAT will print an error to inform that there
are no “OAT” perturbations in the exposure space in such an
For example, OAT plots may be created for the case study example in this vignette as shown below.
# OAT perturbation plot of the first metric <- plotPerformanceOAT(systemPerf, # the first performance metric calculated using runSystemModel p1 # summary of the simulation simSummary)
Alternatively, the argument
metric may be used to
specify the name of the performance metric to be plotted. The code below
provides an example.
# OAT perturbation plot of the first metric <- plotPerformanceOAT(systemPerf, # performance metrics p1_2 # summary of the simulation simSummary, metric = "volumetric reliability (fraction)") # name of the metric
Note that time series generated using simple scaling cannot not contain replicates. If stochastic models are used to generate the perturbed time series with more than two replicates, the OAT plots would include a shading that indicates the minimum-maximum ranges of the performance metric across replicates.
plotPerformanceSpace: The function plots a heatmap
and contours of a given system performance metric at multiple target
locations in the exposure space. This function can be used to plot from
two dimensions selected by the user. The function returns a
ggplot object that can be used to place the plots in panels
using higher dimensions, as desired by the user. In some cases, there
may be a clear performance ‘threshold’, above or below which the system
performance becomes undesirable and/or triggers a system ‘failure’ (for
example, an agreed minimum specified level of system reliability). In
this case, the user may specify the threshold value of the performance
metric as an input argument, resulting in the addition of a thick
contour line to the plot in order to mark this threshold in the
performance space. If the exposure space has more than two perturbed
attributes (i.e., a multi dimensional performance space), the user may
specify the perturbed attributes to be used as the axes of the plot.
The case study has only two perturbed attributes. The performance space heatmap and contours may be plotted using the code shown below. In this case a threshold of 28 litres per day for the average maximum water deficit is used to illustrate a hypothetical case where the rainwater tank is no longer economically viable for deficit values above this threshold. This threshold assumes that the rainwater tank was sized on the threshold of economic viability using historical climate assumptions.The threshold of 28L/day corresponds to about 10% of the peak (summer) season residential water use of a single person household.
# performance space of the first metric with a user specified threshold of 27 <- plotPerformanceSpace(systemPerf, # performance metric p2 # simulation summary simSummary, metric = "average daily deficit (L)", # the name of the metric perfThresh = 28, # user-defined performance threshold perfThreshLabel = "Max Deficit") # custom label for the threshold
It is possible to add various lines of evidence to provide guidance
on which parts of the exposure space are more or less plausible in a
future climate. For example it is possible to superimpose projections
from climate models to the performance space plotted using
plotPerformanceSpace. This climate data should contain
values of projected changes in attributes that are used as the axes of
the performance space, and which need to be developed separately from
the foreSIGHT workflow. For example, one might extract relevant
attribute values from a 30 year future timeslice from the relevant
climate model output, potentially after downscaling, bias correction or
One may also elect to use the climate model simulations (potentially
after downscaling, bias correction or other processing) as inputs to the
system model to generate new performance values corresponding to each
projection time series, and in this case it is possible to plot the
performance values corresponding to the climate model simulations as
coloured data points in plots created using
plotPerformanceSpace, using the same colour scale. The code
below provides an example, in which the system performance obtained from
the time series of two simulations from each of three climate models are
# load an exmaple alternate climate data available in the package data("egClimData") # expected format of egClimData - the column names should match attribute and performance metric names! head(egClimData) #> P_ann_tot_m P_ann_seasRatio P_ann_nWet_m Temp_ann_avg_m Name Avg. Deficit #> 1 0.8978995 1.1138472 0.5118911 0.5810644 Model-C 26 #> 2 0.9702083 0.9211320 0.5561901 0.5523804 Model-C 31 #> 3 0.8904947 0.9624719 0.5192335 0.5238058 Model-N 24 #> 4 0.9767107 0.8911944 0.5675189 0.5328451 Model-N 28 #> 5 0.9460873 0.9283558 0.5431669 0.5302215 Model-G 25 #> 6 0.9366613 0.8831221 0.5434367 0.5269841 Model-G 31 # rename "Avg. Deficit" to match the name of the performance metric colnames(egClimData) <- "average daily deficit (L)" # performance space overlaid with alternate climate data <- plotPerformanceSpace(systemPerf, # performance metric p3 # simulation summary simSummary, perfThresh = 28, # user-defined performance threshold perfThreshLabel = "Max Deficit", # custom label for the threshold climData = egClimData) # alternate climate data
plotPerformanceSpaceMulti: The third function available in foreSIGHT for plotting system performance is the joint presentation of multiple system performance metrics to facilitate decision making. The function plots contours showing the number of performance metric thresholds exceeded in the performance space. The user should specify the minimum or maximum thresholds of each performance metric as input arguments for calculation.
Using the case study data, the number of thresholds exceeded may be plotted as shown below.
# plot number of performance thresholds exceeded <- plotPerformanceSpaceMulti(systemPerf, # 3 performance metrics p4 # simulation summary simSummary, perfThreshMin = c(NA, 0.8, 0.6), # min thresholds for each metric # use NA if not applicable perfThreshMax = c(28, NA, NA), # max thresholds for each metric climData = egClimData)
The process of climate ‘stress-testing’ is often undertaken to
facilitate decisions involving choices between multiple system
configurations or operating policies. Step E of the process involves
comparison of the results from these alternate choices under climate
perturbations. Steps C and D are repeated for the multiple
configurations/policies and the results are used to compare the
performance spaces and number of thresholds exceeded to identify choices
that exhibit better performances under changes in climate attributes.
Figures created using the plotting functions
plotPerformanceSpaceMulti() discussed in Step D can be used
for the comparison.
To illustrate such a comparison in this case study, consider the
following alternate configuration of a rain water tank. The original
configuration is referred to as “System A” and this alternate
configuration is referred to as “System B” henceforth. System B is
alternate rain water tank design that harvests water from the some roof
roofArea), but has a higher tank volume
tankVol), compared to System A. The generated perturbed
scenarios are used to simulate the performance of this alternate system
(System B) in the example below.
# plot number of performance thresholds exceeded <- list(roofArea = 205, systemArgsB nPeople = 1, tankVol = 2600, firstFlush = 2.0, write.file = FALSE) # run the system model <- runSystemModel(sim = sim, # simulation; the perturbed time series systemPerfB systemModel = tankWrapper, # the system model function systemArgs = systemArgsB, # argument to the system model function metrics = metrics) # selected performance metrics
The performance spaces of the average daily deficit (L) for the two system configurations can be compared by generating the figures shown in Step D for system B, using the code below. We leave it to the user to create these figures.
data("egClimData") colnames(egClimData) <- "average daily deficit (L)" <- plotPerformanceSpace(systemPerfB, # performance metric p5 # simulation summary simSummary, perfThresh = 28, # user-defined performance threshold perfThreshLabel = "System B\n Max Deficit", # custom label for the threshold climData = egClimData, # alternate climate data colLim = c(22, 32)) <- plotPerformanceSpaceMulti(systemPerfB, # 3 performance metrics p6 # simulation summary simSummary, perfThreshMin = c(NA, 0.8, 0.6), # min thresholds for each metric # use NA if not applicable perfThreshMax = c(28, NA, NA), # max thresholds for each metric climData = egClimData) # alternate climate data
In addition foreSIGHT contains a function named
plotOptions that can be used to plot the differences in the
performance metrics of two system options and the shift the performance
threshold contours. The below code provides an example.The comparison
shows that the threshold values of maximum deficit (28 litres) are
exceeded in a fewer perturbed scenarios for systemB (lower area of the
performance space), compared to systemA. Thus, systemB exhibits better
performance in terms of this performance metric.
data("egClimData") <- plotOptions(performanceOpt1 = systemPerf, # performance metrics of option 1 p7 performanceOpt2 = systemPerfB, # performance metrics of option 2 sim = simSummary, # simulation metadata opt1Label = "System A", # label of option 1 opt2Label = "System B", # label of option 2 titleText = "Avg Deficit: System B - System A", # plot title perfThresh = 28, # threshold value of the metric perfThreshLabel = "Max. Deficit (28L)", # label of the threshold contour climData = egClimData) # other climate data
Thus, in this case study the results of the ‘stress-test’ indicate that system B is preferable as it should operate satisfactorily across a wider range of conditions, including the drier climate projected by the alternate climate data.
This concludes the workflow of climate ‘stress-testing’ a system using the foreSIGHT package. These steps may be repeated to compare the performance of other system configurations or operating policies.
This vignette demonstrates how foreSIGHT may be used for climate impact assessment of an environmental system. The example code provides an introduction to how the functions work together for application of a ‘stress-testing’ framework.
While the climate impact analysis has been presented as a sequential work flow here for demonstration, there are important aspects to be considered. ‘Stress testing’ typically involves iterative procedures to understand the sensitivities of the system to changes in various hydro-climate attributes, to choose the most relevant attributes for perturbation, and to compare the performance of alternate system configurations. foreSIGHT offers multiple options for an advanced user at each stage of this ‘stress-testing’ process. There are nuances surrounding the selection of these choices especially when more complex stochastic models are used to generate perturbed time series to assess real-world systems.The reader is directed to the Detailed Tutorial for details.